Sourcing those inline 1A fuses and fuse holders was a bit of a challenge

  • SeeMarkFly@lemmy.ml
    link
    fedilink
    English
    arrow-up
    4
    ·
    1 year ago

    You should be able to get those at any automotive store. I’ve seen them at ACE too.

      • SeeMarkFly@lemmy.ml
        link
        fedilink
        English
        arrow-up
        7
        arrow-down
        1
        ·
        1 year ago

        Fuses are thermal devices. They don’t care if it’s AC or DC. It’s basically the weakest link in the chain. It’s supposed to fail WAY before anything more important (or expensive) fails.

        • litchralee@sh.itjust.works
          link
          fedilink
          English
          arrow-up
          8
          ·
          1 year ago

          Caution: fuses, breakers, resistors, and quite frankly, all electric or electronic components, have a voltage rating. A 12vdc automotive fuse is not built with sufficient clearance or creepage to guarantee that 120vac or 230vac won’t accidentally conduct to the wrong places.

          A quick look at high-voltage fuses up on a utility pole reveals that they are indeed built larger for higher voltage. OP is correct to be concerned, but because of voltage, not necessarily because of AC or DC.

        • snf@lemmy.worldOP
          link
          fedilink
          arrow-up
          6
          ·
          1 year ago

          They don’t care if it’s AC or DC

          I figured this was most likely the case, glad to have it confirmed. I just wanted to err on the side of caution