Sorry I’m a bit late
I have still yet to see any other media library handle so many tens of thousands of audio files of varying encoding & naming conventions, so smoothly; “Media Monkey” etc were oft recommended but never once up to the task. Until just a few years ago, it was remarkably convenient for ripping a CD, too; correct metadata & all.
For a short while, WMP was to music files, as Calibre is to ebooks.
Since they said they have “5g home internet (about 10 times faster than the best wired option and 3 times cheaper)”, with “shit ping”, I assumed they meant 5th Gen cellular as their internet service at home.
Only a couple years ago, did we finally get a cable drop in our neighborhood, to actually give faster service than 4G LTE. (There’s still no fiber here, at our location in central Denver.) Because the cable company (Comcast) doesn’t offer a reasonable rate, we use line-of-sight wireless to a local mesh operator. Until then, we used 4G & 5G cellular, as our home internet. It was shit for reliability, but when it worked, the peak speeds beat any residential service available, by a pretty wide margin. Of course, those peak speeds turn to timeouts whenever the highway fills up (& our 5Ghz WiFi still flakes out too, as does the 2.4 Ghz wireless camera, & pretty much anything else that isn’t shielded).
There was no point in running ethernet, with that setup; it was never going to be stable. I still had to run 2 hardwires though: one to the Sony PS2, & the other to an ancient beige switch by the IBM PS/2.
Some people in the mountains & such, are on “5 Gigabit” wireless internet, but most seem to be on even lower speed plans than that. I’m really curious which @Default_Defect@lemmy.world has, because 5th Gen cellular is literally the best internet a lot of US residents can get, despite the abysmal terms & throttling that so many providers employ.
Total Annihilation.
ARM vs Core
My last several multicore multithreaded “smartphones” each sucked at multitasking; why should I hold myself to a higher standard than the entire telecom industry?
I remember running out of those at work, & intentionally crushing the cheap-ass crimp-tool in my hand, just so I could finish up the next day with pass-through connectors & my Klein tool, rather than spend the next two hours re-terminating connectors that I ‘should have’ gotten exactly right the first time.
15 wired devices, kthx. Once & done.
No more “why’s it down now”; no deauth attacks; no weird outages when highway traffic spikes from nav\music-streaming users getting tower timeouts that cause their WiFi to aggressively cry out for every known SSID.
With wired connections, I set it up once & it keeps working. With WiFi, it’s a constant shouting match version of the Telephone game, with openly malicious actors literally headquartered a few blocks away.
Yes, it seems painfully obvious that the primary driver of new WiFi router sales, is WiFi overcrowding.
Hmmm, that reminds me; I need to separate out all the old ones that say “10BaseT”
802.15.4a/ab/ac, seems even weirder, given what we’ve become used to with AM/FM signaling modes.
After the usual “Huh, that seems like a clever way to send signals” reaction, a closer perusal of the tech & its established industrial capabilities, reveals Surface penetrating radar for machine vision & medical imaging, P2P, P2MP, local file-exchange, low-power low-latency streaming, greater range than bluetooth, greater interference resistance than WiFi, & reduced airtime per Mb, at lower emission power than a hair dryer or cellphone.
Gee, I wonder why it got forcibly channeled into exclusively device-to-device location pings, with no direct radio access or firmware, available to devs?
Seriously, go look at what the military, industrial, security, & medical sectors have already been doing with UWB, then look at the specs for the compact chipsets & SOCs released since 2017, & then look at what BMW, Apple, Google, & Samsung are doing with it. Oh yay, Airtags. I mean, they do work, but they’re about 1/1000th of what the U1 could do, if app devs had access to the radio instead of being gatekept behind the FindMy device-to-device services.
Them: “The WiFi is down.”
Me: ‘… No, I still see the TV & the laptop & Pi, on the network.’
Them: “I can’t connect to Flipboard.”
Me: ‘Ohhh, the internet is down. It’s probably at the cable modem. Wait a moment for it to failover to wireless, then try again.’
Them: “Yep, now the WiFi is back.”
I’m just waiting to hear about someone trying to charge their escooter via POE.
Wireless has a lower minimum latency than wired, that’s why trading houses set up relay towers from Chicago to NYC, in order to achieve the lowest possible latency for their trades between the two markets.
Wired gives better stability, due to almost zero interference noise. The primary cause of sucky WiFi speeds/stability, is having too many other people’s routers nearby.
Weird: I just noticed that I have seekbar preview on my desktop install of VLC, but not mobile. Now I want to compare to the Win version as well, because I’m noticing some menus look different than I remember.
Honestly, I install VLC just to snag the file-associations away from the WMP / Windows Video apps, because they remain insecure by default.
ChromeCast was far too finicky & app-dependent for my liking; also didn’t seem to add any platform-specific content I cared about.
Samsung was awful. Didn’t work with anything except Samsung & then still very app-specific.
Raspberry Pi is a great way to put a proper desktop browser, & standard devices like a HDD/NAS, KB/mouse, touchscreen control, on a TV; but it doesn’t receive casts from one’s phone out of the box, nor offer any exclusive streaming content. That said, a Pi running Kodi can be a pretty great media center PC, for content you already have.
Roku often has free streaming content that I & my family actually like to watch.
I also find it to be a much less tightly gated app ecosystem, than ChromeCast etc. There are Roku apps (annoyingly called “channels”) that allow me to cast whatever files I’ve got on mobile, or whatever media streams I browse to; no restrictive “this app doesn’t cast that” limitations. I have seen similarly general-purpose casting apps for ChromeCast etc, but the only ones I’ve seen used were a lot more limited than what I run on Roku. Several seemed to have had their functionality actively disrupted by system updates from Google. Never had any such issue on Roku; in fact, my venerable RokuHD unit plays more codecs than it used it, & had an actual bugfix just last year, despite Roku announcing EOL in 2019. The RokuExpress is a bit of a dog (about as slow as the RokuHD), but it works for non 4K content. The RokuUltra has worked flawlessly so far.
I don’t know of any smart TVs from major OEMs, that support streaming direct from Samba shares / NAS, right out of the box; but there are apps (“channels”) for that.
Roku remotes have no numbers on them; if you get a RokuTV (a TV with Roku built-in), it will not ever accept numbers input, even from another remote. For this reason, I recommend getting a TV with proper tuner & number keys, if there’s any chance the TV will get used for actual OATV broadcasts. (“Free, over the airwaves, as God intended.” - David Letterman)
ATSC 3.0 is getting encrypted, though (violates the terms of the broadcast license, but the FCC isn’t stopping it). So, useful OATV without internet, may disappear soon anyway. Also worth noting: changing channels betwen encrypted ATSC 3.0 OATV streams, is sloooow. Like really slow; don’t push the button too quickly or the TV tuner might crash, slow.
None of the streaming devices like ChromeCast/Roku/etc, have the full breadth of DigitalVideoRecorder capability. If you actually want a great OATV DVR experience, consider getting an external ATSC 3.0 tuner with “NextGen TV” certification logo. You might even want a dual/multi tuner unit: Even though many TVs & streamboxes & tuners, have multiple inputs, none of them support Picture-In-Picture except the dual tuner units. More than I can say for the TVs themselves: HiSense replaced a 40" with a 44" because the power-switch daughterboard died, & they sent a replacement part but then realized they had no techs in the area to install it. (They didn’t have the 40" anymore, poor me.) Element has repeatedly made their tuner app worse & worse, to the point where it doesn’t even go to what channel you’re on when you pull up the guide, dumps out of the guide at seemingly random intervals, & sometimes switches to the wrong channel & then freezes up. Bear in mind, the TV manufacturer makes the OATV tuner app, for each of these TVs, not Google/Roku/etc. Which makes the insanely bad layout of the Samsung TV & casting apps, even more inexcusable: they had control of both ends, & seem to have put minimal effort into anything but restricting features that were “universal” over 10 years ago.
I like Roku, but their remote is stupid, for those few people who still watch OATV.
I think the best of both worlds is to get a TV with a good built-in tuner \ tuner-app, then hook a standalone Roku unit to it. All the Roku features & you get to keep the number keys & CC button.
Just make sure it isn’t running Android 4.4
Most “smart” TVs (which can & do fetch currently-airing show data from each channel’s metadata streams, when tuned to that channel) rely on internet connectivity to show the channel guide, so implicitly, that they act slow & buggy when used without internet.
Some “smart” TV’s tuner apps, seem to get buggier & less convenient after updates, as if the manufacturer decided to gimp the tuner, in an effort to force more streaming usage.
Haven’t looked at MX Linux before, thanks for the info!
Like I said, I really can’t care much about window managers at this point. Mostly, I’m tired of having multiple window managers installed after just a few app installs. If I start out with Gnome\Plasma, I’ll surely end up wanting some apps that have only been made for KDE, & vice versa. Never once have I seen a Linux machine that had all the apps I’d want, using just one window manager.
I suppose most apps could be compiled from source to run on one or the other, but alternative compiles have invariably been a hassle to me…
Since I end up needing at least two window managers installed anyway & they keep changing generations about 10x as often as I change machines, it’s pointless for me to have a preference. The best window manager is whichever one each developer of each app happened to use?!?