• 3 Posts
  • 37 Comments
Joined 1 year ago
cake
Cake day: October 13th, 2023

help-circle
  • No, yeah, I get that, I was asking about that “100% CPU usage and 70% GPU usage and if I turn details up I get a slideshow”. Is this at 1440p or are you playing at 1080p?

    Edit: actually, I watched some benchmarks and the RX580 should deliver some solid FPS at 1440p so the CPU is the actual bottleneck here. Go first option and that will give you a very big framerate boost






  • My issue lies elsewhere, it takes me that long to have the printer recognized by the OS, then by CUPS browser, then I send the printing job and… it just stalls, never prints. I then cycle the USB ports and start all over again until it miraculously prints




  • Nitro+ worth it?

    I guess not for that much more. A 10% increase is substantial, and I don’t think the difference in actual performance is enough to justify it; but you also said that your region can get toasty in summer, and the Nitro+ has better cooling which could help. I don’t think the Pulse will get too hot to work, but it may be something to consider!

    DDR5

    Those are one of the best performance to price ratio, and they’re very inexpensive for what they are (plus full support for AMD overclocking, EXPO I think it’s called); you can also go higher frequency, but prices will go up as well.

    cooler

    Good call then, AIO will probably perform a bit better with extreme high ambient temps

    970

    All good, a 970 Evo Plus might be cheaper so why not!

    5.0

    Yeah, there’s no way gaming will saturate PCIe 5.0 anytime soon, no need to pay premium for specs you won’t benefit from

    Happy building and gaming!


  • About RAM, Trident Z5 NEO @ 6000Mhz seems to be the best price/performance ratio.

    About GPU, I’d personally go for a Sapphire as they’re one of the historic AIB for AMD GPUs and I also dig a lot the design of the Nitro+ lol

    See if you can save something on the MoBo (by getting a lower trim) and 2x2TB might be a bit overkill for gaming only (ofc it depends on your habits, but I personally don’t have games installed for more than 500-600GB). Also, you picked two PCIe 4.0 NVMEs, so maybe consider a 970 Evo Plus if it’s cheaper than the 980 Pro

    About cooler, I’d prefer an old fashioned air cooler simply because it can’t leak lol







  • I was a bit off, they were 15% cheaper than the Ironwolf on the same website/from same seller (156, not USD, vs 179, not USD).

    For a better comparison, I went to WD’s official store and for what I spent on these two 8TB Exos (312, not USD) I can get two 4TB Red Plus (310, not USD). Can’t make a direct comparison with other Seagates because their “buy now” section redirects me to Amazon, which, as you said, is not the best since they allowed third party sellers, but on there the 8TB Ironwolf is 250 (!!).

    As you already know, I’m not in the US so I can’t buy from there. Unfortunately, Seagate’s “buy now” section (which should be official retailers) brings me to either Amazon or other chains that don’t have much else besides portable drives.

    At this point I have two options, really: try again the same online store (which is kinda like Amazon, many third party sellers), but getting Ironwolf, which should be more likely to be “legit”, and of course check them as well when they arrive, or settle for two 4TB WD Red Plus (which isn’t ideal as I’m already nearing 2.5TB total, but should allow me to get by a while longer) bought directly from WD.

    edit: looking at the link you provided, I paid 30% less for my Exos. Would that sway you towards keeping it without warranty (apart from the seller’s, which is one year I think)? Mind that I don’t need enterprise-grade drives, and I think even NAS drives are overkill for my needs. For example a WD Blue with its 55TBW per year might be enough for me (that’s 150GB a day everyday for a year, which is above my average writes), but those don’t come big enough (I need 6TB min to be comfortable) nevermind, they do come in 8TB size, just at a lower spinning speed (5640rpm), but they cost more (267) than the Ironwolf, and are SMR and have 128MB cache. Sounds like a bad deal!





  • Apologies for the wall of text

    Not at all, rather thank you!

    I researched again for parts and, whichever way I go, it’s all very expensive.

    The “cheaper” options are still expensive considered the lack of expandability: I can get, for example, two 3.5" 4TB drives for around 90-100 each, or, slightly better, two 2.5" 4TB drives for around 120-130 each; the 2.5" drives would allow me to get rid of the HDD cage in my PC and mount a fan in its place. Either way, 8TB (actually 4TB + mirrored backup) for 200-250, and I can’t expand it further.

    Slightly more expensive: a one drive Synology NAS, for around 300 (including a 4TB HDD, bought separately); again, locked with no further scaling possible.

    Then, a two drives Synology NAS, for 450-500 (including two 4TB drives, bought separately), no scaling. But it’s getting closer to my needs.

    Finally, a four drives Synology NAS, definitely fitting for my needs, which is 500 not including drives; once I add storage, for example just two 8TB drives (to which I’d add another two down the road), I’m close to 800 (and this is by getting the cheapest 8TB drive I can find, nothing with “NAS” in the name haha).

    Shucking isn’t really a financially good option, it looks like, since external drives are actually more expensive in my country.

    tiny case

    Well, the Node 304 can hold six drives. Realistically, that should be enough for me even if I decide to have two backups (so using two drives for storage and then the other four just to back up those two) and even if I get 8TB drives (at the moment I have just shy of 3TB of data and I think i can easily add another 2TB onto it, but further than that… not sure). Worst case scenario changing only the case is pretty painless, especially if I can sell the old one to buy the larger one.

    gpu

    Yeah, I know I can get an APU, issue is, with that MoBo I picked only PRO APUs support ECC RAM. For what I understand, ECC RAM, while not mandatory, is highly recommended. The data I have is not vital, but if I can avoid corruption and having to download it again, I’d rather do so. To be fair, I’m currently not using ECC RAM and I haven’t encountered data corruption in the past two or three years… so I’m a bit torn on this point now

    your config

    That’s a very expensive motherboard, wow! I can’t find it for less than 350! Definitely over budget for me at the moment

    larger case for my current setup

    This is definitely something I’ll consider, at least as a stopgap until I can build a proper NAS. This way would allow me to have many drives and I could also repurpose the ones I already have.

    I think I’ll have to put this project on hold for now haha but thanks for the huge help, I’ll definitely watch that video in the meantime!

    Thanks again!

    edit: looks like I can shave off another 100 from the planned build, since I can get a CPU (Ryzen 5 2600) and a 550W PSU for free. Which is actually not bad. Remove one stick of RAM, since 8GB should be enough, and I can save another 30, bringing the total to around 500. Not that bad as a start! Actually, bring that back to 600, since it would make more sense to get 8TB drives since I’m already around 3TB. Still, saved money is money saved haha