School is starting up soon, and I want to install a stable distro to a 64GB flash drive that i own will remain stable while booting onto at least 2 computers (my home PC for maintenance and my School laptop for, well school).

I was thinking of just using Debian, but wasn’t sure if it would work well in terms of compatibility with my requirements.

Any insight would be greatly appreciated.

  • 52fighters@kbin.social
    181·
    1 year ago

    Do yourself a favor and get an external hard drive. You’ll get much better results and can run almost any distro with it.

    • jollyrogue@lemmy.mlEnglish
      10·
      1 year ago

      Definitely this.

      I gave up on thumb drives as they are kind of trash. External NVMe drives are affordable, and the speed difference is BIG.

    • nathris@lemmy.ca
      6·
      1 year ago

      Even better get a NVMe enclosure and an internal NVMe drive.

      Enclosures are $20 and you can get a 500gb Samsung 970 Evo for $35.

      Smaller, lighter, cheaper and faster than any off the shelf portable drive you could get. I have one and it fully saturates the USB C 10Gbit port on my motherboard.

  • UnfortunateShort@lemmy.world
    13·
    1 year ago

    One piece of advice I want to throw in here: Use a proper file system! exFAT or F2FS are flash-aware and will ensure that you dom’t kill your drive by frequent writes to the same memory cells!

    • Aleusha@lemm.ee
      1·
      1 year ago

      I use puppy Linux all the time. Works great, on a fairly crappy USB stick. It saves files to the stick and saves user preferences and everything. Very recommended from my end.

  • Hatch@lemmy.ml
    10·
    1 year ago

    Do you want it to be persistent(all your stuff is saved) or you dont mind it starting fresh everytime you plug in to devices?

  • TerkErJerbs@lemm.ee
    9·
    1 year ago

    Bunsenlabs is Debian-based, but doesn’t have a classic desktop environment. Instead it uses super lightweight Openbox window manager and some other tricks to emulate one. It will run very well with 20gb disk space (you have triple that at your disposal). If you remove the programs you don’t use (the office suite, etc etc) you can trim the install down even more.

  • SethranKada@lemmy.ca
    91·
    1 year ago

    You could try Tails, it’s specifically made for this purpose. It’s ui is a bit old looking though, and it’s not that user friendly. If you can stand xfce or kde though, you’ll feel right at home though.

      • warmaster@lemmy.world
        1·
        1 year ago

        I had the same need, and tried Tails thinking it would serve me well as a mobile workstation, but it ended up complicating things. Almost nothing is persistent.

        Tails is good for other use cases.

      • krimsonbun@lemmy.ml
        1·
        1 year ago

        That’s what I use tails for. Persistent storage for files and software make it really convinient to travel around with.

  • jollyrogue@lemmy.ml
    7·
    1 year ago

    It’s more about your software requirements then anything else.

    Stable distros can be a pain when run as a desktop, so that might need to be rethought.

    OpenSuse Tumbleweed is a rolling distro which deserves a look.

    Endeavor OS for something Arch based.

    Debian Testing is rolling for something Debian.

    Fedora is semi-rolling for something in the red hat ecosystem.

    OpenSuse Leap is a stable distro which gets bumped once a year, so that might be an option.

  • signofzeta@lemmygrad.ml
    6·
    1 year ago

    It can be done. Just don’t cheap out. A USB4-attached NVMe disk will be faster than a run-of-the-mill USB 3.0 flash drive, and that will run circles around some cheap $10 USB 2.0 drive.

    Not all flash drives are rated for constant use, so be sure to have a backup plan.

    Other than that, it’s a cool idea! Go for it!

  • OldFartPhil@lemm.ee
    4·
    1 year ago

    I’ve always used Xubuntu. It’s reasonably lightweight and the Ubuntu USB creator does the heavy lifting for creating persistence. The only downside is you have to have a running instance an Ubuntu flavor (bare metal, VM or USB) to use the tool.

    • toothpaste_sandwich@feddit.nl
      0·
      1 year ago

      Interesting! But will changes made to the OS you’re using be persistent? If I’m reading this right, then probably not, right?

        • toothpaste_sandwich@feddit.nl
          0·
          1 year ago

          That’s interesting, I’d be interested in finding out more about that. Let’s see, I’ve always wanted to try this:

          @ChatGPT@lemmings.world, how do you set up Ventoy for persistent installs of distros? That is, to be able to make changes to the operating system and have them stick?

          • ChatGPT@lemmings.worldB
            1·
            1 year ago

            Hi toothpaste_sandwich@feddit.nl,

            Creating persistent live USBs with Ventoy is possible. However, keep in mind that not all Linux distributions support this feature. The distributions that Ventoy currently supports for persistent installations are Ubuntu and some of its derivatives.

            Here’s a basic step-by-step guide:

            1. Prepare Ventoy: Ensure that you’ve already installed Ventoy on your USB drive. If not, download the latest Ventoy release from its official website and install it to your USB drive.

            2. Prepare the ISO file: Download the ISO file of the Linux distribution and copy it to the Ventoy USB drive. You can just put it in the root directory.

            3. Create a persistence file: Ventoy uses a data file to enable the persistence feature. You need to create this file on the Ventoy USB drive, there is an official utility named create_vtoy_img.sh in Linux or Ventoy2Disk.exe on Windows that you can use to create this persistence data file. Name the file and define its size according to how much persistent storage you need.

            4. Bootstrap the persistence feature: After creating the data file, you should create a JSON file in the Ventoy USB drive to bootstrap the persistence feature. You can create a .json file in the root directory of the Ventoy USB drive with the following format:

            {
    "persistence" : [
        {
            "image" : "/your-linux-distro.iso",
            "backend" : "/ventoy-persistent-data-file.dat"
        }
    ]
}

            Replace your-linux-distro.iso with the filename of your Linux distro ISO file and replace ventoy-persistent-data-file.dat with your Ventoy persistent data file’s name.

            1. Boot from the Ventoy USB drive: Finally, boot your computer from the Ventoy USB drive. The Linux distro will launch with the persistence feature, so you’ll be able to save any changes you make.

            Remember this is a generalized guide and actual steps can vary based on the specific distro, and tools being used.

            Hope this helps! If you encounter issues or have further questions, feel free to ask.

            (bot@lemmings.world)